garage door Maintenance

A crucial part of your garage door maintenance is the garage door springs. They have a big impact on how your garage door opens and closes. The longevity of your garage door springs may be increased with regular maintenance, which will also guarantee the smooth operation of your garage door. By regularly servicing your garage door, you can guarantee that the rollers, openers, cables, and springs are in good operating order. To raise and lower your garage door services, they must work together. The lifespan of your garage door is increased by keeping these components in good shape. It is far less expensive to maintain the components of your garage door and do simple repairs than to replace the current door. It might aid in finding issues and avert pricey repairs.

Regular upkeep improves the security of your house by avoiding any unauthorized entry from burglars or criminals. Maintaining the safety of your system by using this garage door servicing advice can assist. In this comprehensive guide, we’ll go over the many kinds of garage door springs, the equipment needed to maintain them, the procedures involved, and whether or not you should call an expert.

Always Inspect For Wear And Tear

Close the garage door while you observe from inside your garage. Check for any cable cuts, dents, or scratches that can prevent the door from closing and opening smoothly. Utilizing a torque wrench or an electric screwdriver, tighten any slack nuts and bolts.

Check The Springs

Keep an eye out for any symptoms of wear and tear on the garage door springs. Check the coils for gaps, corrosion, or fractures. If you observe any of these symptoms, it could be time to replace the springs. Disconnect the garage door opener before starting maintenance to avoid any mishaps. Pull the release handle on the device to detach the garage door openers from the door. Use a g-clamp to secure the garage door to stop it from moving if it has torsion springs. The set screws on the winding cone should then be removed using an adjustable wrench. To relieve the pressure, rotate the cone in the other direction. Simply unplug your extension springs from the door track if you have any.

Clear the garage door springs of any dirt or debris by wiping them with a clean towel. The springs should then be sprayed with lubricant to prevent corrosion and lessen friction. After the springs have been cleaned and oiled, reattach them to the door track. Torsion springs should be wound back into position, and the set screws should be tightened. Then, by oppositely pushing the release handle, reconnect the garage door opener.

Checking spring repair

Clean The Tracks

The garage door maintenance is very essential to track because can accumulate dirt and rust over time. As a result, components cannot move as easily as they might if the tracks were clear, which may affect how well your door operates. Use an old toothbrush to remove any oil, dirt, or grime from your roller tracks if they are not clean. Once you’ve used a brush to remove most of the debris, spray disc brake cleaner on the tracks. To get rid of the cleaner and any oil or debris that is left, wipe the tracks with a clean towel.

Worn Out Rollers

The rollers are crucial to the functionality of a garage door. They facilitate the door’s smooth movement up and down the rails. The door may become misaligned or jammed as a result of worn-out or broken rollers over time. It is preferable to contact a garage door repair expert to replace the rollers if you detect any problems with them.

checking the roller of garage door

Lubricate Important Moving Components

Greasing the chain or screw on your garage door opener will keep it from sticking and will only take you 10 minutes a year. The overhead springs may be lubricated simply using a spray lubricant.

Security Add-Ons For Garage Door Openers

Many garage door openers come with optional extra safety features. To add a layer of protection against entrapment, think about adding a photo eye or edge sensor. Remember that upgrading an outdated opener won’t make it compliant with the most recent U.L. requirements. Make that the supplementary safety equipment is fitted and set correctly, such as photo eyes or edge sensors. The screws on the bottom brackets of the door should never be removed, adjusted, or loosened. The lift cable, which connects these brackets to the spring, is under a lot of force.

Security checking of garage door

Examine The Overall Appearance Of Your Garage Door

Look for water damage, warping, and flaking or chipped paint on doors. It could be necessary to smooth out and repaint rust areas on metal doors. When cleaning your door, use a gentle all-purpose cleanser. You may arrange this cleaning to coincide with your car wash.

Check Cables For Damage

High-tension wires that occasionally break or sustain damage allow garage door openers to raise doors. It is not advised that you attempt to resolve the situation on your own since the force from them might result in fatalities or major injuries.

checking damage cables

Look Into The Hardware

Check that your hardware is in excellent condition if you hear squeaking coming from your garage door or observe any strange motions. Even if everything appears to be operating correctly, it’s helpful to frequently examine the hardware. Check the hinges on each door to accomplish this. To lubricate them and make sure everything is tight, use garage door lubrication. Then use brake or carburettor cleaner to clean the tracks. Avoid lubricating the track since doing so might make the door slide and become imbalanced. Then, ensure that all track and door hinge hardware is firmly fastened.

Test Of Force Setting

Start by completely opening the garage door before shutting it using the wall button or transmitter of the door opener. Take your hands while the garage door is moving and raise them against the direction it is closing; if the door does not stop moving or readily reverse, take your hands away right immediately. If the door does not reverse, the force setting is too high and has to be changed by a qualified expert.

force setting test of garage door

Seal Any Holes Under Your Garage Door

The weatherstripping on your garage door may be the source of any gaps you’ve seen near the bottom. Weatherstripping on garage doors frequently degrades over time on its own. Additionally, mice and other vermin frequently eat on it.

To have new weatherstripping installed, you may either hire a pro or purchase a kit from your neighbourhood hardware shop. Measure the bottom of your garage door at least twice if you decide to apply the weatherstripping yourself to be sure it will fit. The weatherstripping should then be cut to the length of your garage door and installed under the kit’s instructions.

A bottom gap could potentially be a sign of garage structural settlement. Another option is that the bottom door panel is drooping on its own; in this case, the panel or the door may need to be replaced.

seal any hole of garage door

Important Safety Advice

Follow this advice from our knowledgeable specialists to keep yourself safe. The equipment that opens the door automatically should not be cleaned with water. Water damage has the potential to invalidate your warranty or electrocute you. Keep your fingers out of the door panels or moving parts at all times, and never adjust the spring unit on your own.

Commercial garage doors Augusta areas

The most valuable object in your house is a garage door, utilized frequently throughout the days, months, and in all weather conditions. Your garage door is essential to the security of your automobile and other possessions. However, your garage door needs routine maintenance, like any other house component, to keep it in good condition. Take the time to perform regular preventative care to ensure it runs properly for many years. Its lifespan may be increased, and expensive repairs can be avoided by executing quick maintenance procedures regularly. Homeowners should read this blog post’s suggestions and strategies for maintaining garage doors. Take always the best garage doors services in Augusta due to the house looking good.

Look For And Seal Any Air Or Light Gaps

To reduce the number of outside factors entering your garage, visually evaluate your garage door for any areas where light may leak from the outside and make the necessary repairs. Additionally, check your garage door openers and, if necessary, the windows for air draughts. If you find any, seal the area with weather-stripping or sealant made of a suitable material for your garage door.

 Detect gaps in door

Lubricate Hardware

Lubricating all the hardware is one of the simplest methods to keep your garage door operating correctly all summer. Loud sounds and screeches when opening and shutting can be prevented by lubricating the hardware. Use a multipurpose oil to lubricate the door’s hardware and other components. Grease should never be used to lubricate a garage door.

Fix The Area Next To The Door

Many leave oily tools lying about after we finish working or clutter our garages with rubbish. The garage door mechanisms end up covered in a large portion of the dust and debris accumulating there. Clean cobwebs from corners and sweep any dirt and debris from floor mats. Clear the area inside and outside the entrance of any clutter. To prevent water from entering the garage, remove any leaves and other debris from the site where the door meets the ground and inspect the drainage and gutters.

Fix the area of the garage door

Verify The Weather-stripping On The Doors

The weather-stripping on your garage door is crucial in keeping pests, dampness, and draughts out of your garage. First, check frequently to ensure it creates an efficient seal and is in good shape. Then, replace it if required to keep it operating effectively.

Verify The Garage Door’s Balance

The overhead door will have to work more and wear out faster if a garage door is not balanced properly. You must check the balance of your business garage door to maintain it is working correctly. First, pull the release handle to disengage the opener. Next, physically partially open the door. A perfectly balanced door will hold this position independently without your help. However, you must adjust the door springs if it goes up or down on one side or the other.

Checking the balance of the garage door

Inspect All Moving Components

No one wants their garage door to malfunction, given how hefty they are and their role in a home’s security. This implies that it’s crucial to check the parts of your door for any indications of problems.

Every garage door repair includes moving parts, including hinges, chains, and rollers, which you should inspect regularly. The door won’t operate correctly if any of these components malfunction. Therefore, if any element of your entry is damaged, you must repair it.

Inspect all moving parts of the garage door

Examine The Cables And Pulleys

Many garage doors, but not all, use pulleys and cables to attach the door to high-tension springs that support most of the door’s weight. This makes lifting it simple and keeps it from falling to the ground as it descends. If the pulleys look rusted, inspect them for damage and oil them. You can determine their taut by picking the wires like guitar strings. They ought to feel the same degree of anxiety. Call a service expert if one looks looser than the other.

Examine cable and pullies

Check For Any Loose Bolts

Over time, loose bolts are a common issue. Bolts securing the brackets to the door will gradually loosen over time due to the number of times it raised and lowered daily. If you check the bolts yearly, you could notice a problem once a bracket separates from a garage door panel, which might lead to significant harm or injury. However, an annual expert checkup may discover and fix this condition before it worsens.

Replace The Rollers On The Garage Door

Rollers may deteriorate with time, like the hardware being loose through usage and abuse. As a result, when doing your biannual maintenance and inspection, look for any signs of warping, chipping, or cracking. Call the neighborhood garage door maintenance specialists when you notice any damage; do not try to handle the repair yourself since the rollers are under enormous stress because they are attached to the lifting wires.

Replace the old roller

Verify The Safety Features

Always examine the safety features when doing routine maintenance. The mechanical auto-reverse and photoelectric sensor prevent your garage from shutting on objects and posing a safety risk. You may rapidly test these functionalities at home with a few everyday items. Wave a broom below the door while shutting automatically to try the photosensor. Put a block or a board of wood beneath the door to test the mechanical auto-reverse. When these garage doors contact the object, it should reverse as it begins to close. Make an appointment with a specialist to examine your safety features if one or both fail to change. Your door might not have these safety features if it is older. Replace your garage door and opener if this is the situation. These characteristics aid in preventing harm or damage from garage door injuries to persons and things. Your family’s safety when operating the garage door installation can be increased by installing a door and opener with contemporary safety features.

Verify all safety features before the door working

Keep Your Door In Top Condition

Maintain your door and take care of any minor issues, such as water damage, warping, rust, or other issues, before they jeopardize its structural integrity and cause you to replace it.

 

garage door replacement

Introduction:

The increase in unemployment and poverty rates due to the coronavirus pandemic has led to a rise in the threat of house thefts and robberies. It is more important now than ever to develop a good security system for your household. As garages act as storage spaces for your automobiles and other expensive belongings, getting your garage doors up to speed is an effective way to respond to the rising threat of thefts. This is where garage door service companies like Aiken Garage Doors come in handy. These companies work towards providing you with high-quality and on-time service. The question is when it is finally time to call them to do their job and replace your door. 

Sagging:

One of the most frequent problems with garage doors is sagging. Olden wooden garage doors are especially vulnerable to this problem. Sagging makes it increasingly for the garage door to open. Thus, it is best to replace your garage door as soon as you witness sagging. Not only will your door open more easily, but it will also look much better improving the overall structure of your house. 

Increased Noise:

Has your garage door been disrupting your peace by being extra loud? If so, it is showing signs of wear and tear. New garage doors create much less noise helping you maintain a peaceful and cozy environment at your house. We, at Aiken Garage Doors, continuously research new technology when it comes to noise reduction. If you use the doors we manufacture, there is no doubt that you will experience a significant reduction in noise. 

Slow operation:

Did you have to wait for your garage door to open completely even when you had remotely instructed it to do so since you were a mile away? This is also a sign of wear and tear. In some cases, lubrication will suffice in resolving the problem but in others, it might be more advisable to replace garage door entirely. A very commonplace reason for slow opening and closing of the garage door is a worn-out motor. Lubricating is just not enough to get a dying motor to run properly. 

Visible Damage:

Signs of rust are to be taken very seriously as they are a sign of poor overall integrity of the garage door. Alongside weakening the structure of the door, rust spots are a pathway for pests to come inside your house. Thus, it is wise to replace your garage door if you can see rust on it.

Conclusion:

While you may be tempted to replace your garage door yourself to save money, it is best to leave it to professionals as the process is not only painstaking but also dangerous. We, at Aiken Garage Doors, are fully licensed and certified to do the job for you. You can request our services online through a simple request form or on-call with one of our agents.

garage door spring

A smoothly operating garage door is vital to the upkeep of your home. It’s something that is used daily when you park your ride, store your tools or even put away bicycles. To get all your items inside and out of the garage when needed, you need your garage door to function properly at all times. The main component that is responsible for the garage door’s smooth operation is the garage door spring. If the garage door spring gets damaged, it can make retrieving your items from the garage a nuisance. If your spring gets damaged, we will also discuss how to choose a garage door’s broken spring.

How to Know If Spring Is Damaged?

  • Hear Weird Noise When Opening the Door: Homeowners might hear loud sounds coming from the garage area and thinking that probably someone got into your garage. After investigation, it usually turns out to be a faulty spring unwinding and creating crashing noises.
  • Gap In Torsion Spring: If you spot a gap between your torsion spring, it’s a clear sign that the garage door spring is compromised.
  • Garage Door Top Is Bent: In some cases when spring breaks, the garage door will bend at the top if you try to open it.  This happens because the garage door’s weight is being supported by mechanics alone without any spring to create torque.
  • Garage Door Movements Feel Weird: If you have a garage door with a two-spring system and movement is not smooth. The door sometimes gets stuck on its way to open and movements are jerky. It’s a sign that springs are failing or completely broken.
  • Loose Components: When garage door springs break, the entire garage door components become out of sync. The pulley and cables become loose and make the overall garage door operation hard.

How to Choose Garage Door Spring?

Garage door springs are mainly of two types; extension and torsion springs. Both options have excellent designs and reliability but they are meant to operate differently from one another. You can ensure a successful spring replacement by understanding what type of garage door you have.

  • Extension Springs: Extension springs are installed at both sides of the door and horizontally extend across the garage door. These types of springs are easy to install and best for overhead single-car garage doors.
  • Torsion Springs: More common type of spring, the torsion is wounded springs that attach on top of the garage door. They don’t particularly expand or contract and offer much smoother operation and support garage door weight with ease. Compared to extension springs, they are much difficult to install and mostly installed in much bigger garage doors meant for multiple vehicle parking.

To simply state, if you have a single car garage then an extension spring will do the job nicely. If you are looking for a smoother movement and ability to lift heavier garage doors, then torsion springs are the way to go.